541 Easel Card SM.


This is another designs by Rae Carr, ….. 541Easel Card SM.

The file is available in several formats for use with different cutting machines.

Dowload and extract files from the zip file.

I used the Brother Scan n Cut CM600 machine but there are other file types available for use with other cutting machines.

The .fcm file has to be transferred onto a usb, which can then be inserted into the side of the machine.

Open the file and then you can begin cutting.

I cut all the main pieces of the file on 320gsm centura pearl card, lilac, and also on a 220gsm green card. I also cut mats for the base and fronts from 320gsm centura pearl by reducing the size by 5mm in all directions on the scan and cut.
** By mixing the colours, I was able to make two cards from this; I took the embellishments from the lilac card to use on the green one and put the green ones to one side to use later.

To make up the card, fold along the score lines on the main piece and attach the second scalloped circle on the bottom half only (This was slightly smaller than the main card piece so I left a small border around the edge.

Thread the lilac circle through the eyelet holes in the lacy topper.

Take the two white mats and place one on the base and the other on the top. The green circle was used as a stopper.

Layer the green cutout piece on top.
Make up the bow and adhere to the front.

Flowers were added to the lilac card.

Rae’s designs can also be purchased and downloaded from www.myprintablecrafts.com, www.craftsuprint.com, www.card-making-downloads.com or from www.etsy.com.